ED Series Wafer butterfly valve
Pamaglarawan:
Ing ED Series Wafer butterfly valve metung yang soft sleeve type at malyari yang mikawani ing katawan ampo ing fluid medium,.
Materyal da reng Main Parts:
| Parts | Materyal |
| Katawan | CI,DI,WCB,ALB,CF8,CF8M |
| Disc | DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel |
| Tangke | SS416,SS420,SS431,17-4PH |
| Luklukan | NBR,EPDM,Viton,PTFE |
| Taper Pin | SS416,SS420,SS431,17-4PH |
Specification ning luklukan:
| Materyal | Temperatura | Gamitan ing pamaglarawan |
| NBR | -23°C ~ 82°C | Ing Buna-NBR:(Nitrile Butadiene Rubber ) atin yang masanting a tensile strength ampo resistance keng abrasion. E ya naman resistance keng hydrocarbon products. Metung yang masanting a general-service a materyales para gamitan keng danum, vacuum, acid, asin, alkalines, taba, oils, greases, hydraulic oils ampo ethycolilely. Ing Buna-N e ya malyaring gamitan para keng acetone, ketones ampo nitrated o chlorinated hydrocarbons. |
| Oras ning pamamaril-23°C ~120°C | ||
| EPDM | -20 °C~130°C | General EPDM rubber: metung yang masanting a general-service synthetic rubber a gagamitan keng mainit a danum, inuman, milk product systems ampo deng ating ketones, alcohol, nitric ether esters ampo glycerol. Pero ing EPDM e ya malyaring gamitan para kareng hydrocarbon based oils, minerals o solvents. |
| Oras ning pamamaril-30°C ~ 150°C | ||
| Viton | -10 °C~ 180°C | Ing Viton metung yang fluorinated hydrocarbon elastomer a maki masanting a resistensya kareng keraklan a hydrocarbon oils ampo gases ampo reng aliwang petroleum a produktu. E ya malyaring gamitan ing Viton para keng steam service, mapaling danum a maygit 82°C o concentrated alkalines. |
| PTFE | -5°C ~ 110°C | Ing PTFE atin yang masanting a chemical performance stability ampo ing babo na ali ya malagkit. At the same time, atin yang masanting a lubricity property ampo aging resistance. Masanting yang materyal a gamitan kareng acid, alkali, oxidant ampong aliwang corrodents. |
| (Inner liner EDPM) | ||
| PTFE | -5°C~90°C | |
| (Inner liner NBR) |
Operasyun:lever,gearbox,electrical actuator,pneumatic actuator.
Kaasalan:
1.Stem head design ning Double "D" o Square cross: Manyaman yang ikonekta kareng miyayaliwang actuators, magdalang mas marakal a torque;
2.Two piece stem square driver: No-space connection apply to any poor conditions;
3.Body alang Frame structure: Ing luklukan malyari yang mikawani ing katawan ampo ing fluid medium eksaktu, ampo manyaman ya keng pipe flange.
Sukat:
Kaugnayan a produktu
-
UD Series hard-seated butterfly valve
Description: UD Series hard seated butterfly valve metung yang Wafer pattern a maki flanges, ing face to face yapin ing EN558-1 20 series bilang wafer type. Material of Main Parts: Parts Material Body CI,DI,WCB,ALB,CF8,CF8M Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NBRDMEPPT,Taperit, Pin SS416,SS420,SS431,17-4PH Katangian: 1. Deng butul a gagawan da keng flang...
-
GD Series grooved end butterfly valve
Description: GD Series grooved end butterfly valve metung yang grooved end bubble tight shutoff butterfly valve a maki outstanding a flow characteristics. Ing rubber seal maka-mold ya keng ductile iron disc, para mika maximum a flow potential. Mag offer yang economical, efficient, ampo reliable a serbisyu para kareng grooved end piping applications. Madali yang i-install kareng adwang grooved end couplings. Tipikal a aplikasyun: HVAC, filtering system...
-
DC Series flanged eccentric butterfly valve
Description: DC Series flanged eccentric butterfly valve atin yang positibong retained resilient disc seal ampo ing integral body seat. Ing balbula atin yang atlung katangian: mas ditak a timbang, mas masikan ampo mas mababa a torque. Katangian: 1. Ing eccentric a aksyon babawasan na ing torque ampo ing seat contact kabang mag-operate ya at magpalawig ya ing bie ning valve 2. Suit ya para keng on/off ampo modulating service. 3. Agpang keng sukad ampo pangasira, ing luklukan malyari yang ayusan...
-
UD Series Soft-seated butterfly valve
UD Series soft sleeve seated butterfly valve metung yang Wafer pattern a maki flanges, ing face to face yapin ing EN558-1 20 series bilang wafer type. Katangian: 1. Deng buak a mag-correct gagawan la keng flange agpang keng standard, madali lang i-correct kabang mag-install la. 2.Through-out bolt o one-side bolt ginamit. Madaling palitan at mantinian. Ing malambut a manggas a luklukan malyari yang i-isolate ing katawan keng media. Instruksiun ning pamagobra ning produktu 1. Pipe flange standards ...
-
MD Series Wafer butterfly valve
Description: Nung ikumpara me keng kekaming YD series, ing flange connection ning MD Series wafer butterfly valve metung yang specific, ing hawakan metung yang malleable iron. Temperatura ning obra: •-45°C anggang +135°C para keng EPDM liner • -12°C anggang +82°C para keng NBR liner • +10°C anggang +150°C para keng PTFE liner Material da reng Main Parts: Parts Material Body CI,DI,WCB,ALB,CF88, Disc DI,WCB,ALB,CF8,CF8M,Rubber Lined Disc,Duplex stainless steel,Monel Stem SS416,SS420,SS431,17-4PH Seat NB...
-
BD Series Wafer butterfly valve
Description: Ing BD Series wafer butterfly valve malyari yang gamitan bilang kasangkapan para pututan o i-regulate ing danum kareng miyayaliwang medium pipes. Kapamilatan ning pamamili kareng miyayaliwang materyales ning disc ampo seal seat, pati na ing pinless a koneksyun pilatan ning disc ampo ing stem, ing balbula malyari yang gamitan kareng mas malala a kundisyun, antimo ing desulphurization vacuum, sea water desalinization. Katangian: 1. Malati ya sukad&mayan ya timbang ampo madali yang asikasu. Malyari yang...
